Skip Ribbon Commands
Skip to main content
Southwest Airlines Engine Failure
Bookmark and Share this page

Event Summary

Board Meeting : Southwest Airlines Engine Failure
NTSB Boardroom and Conference Center
11/19/2019 9:30 AM

​The National Transportation Safety Board will hold a board meeting on Nov. 19, 2019, 9:30 a.m. (EST), to determine the probable cause of the of the fatal April 17, 2018, engine failure and depressurization accident involving Southwest Airlines flight 1380.

The accident airplane, a Boeing 737-700 powered by two CFM International CFM56-7B engines, experienced a failure of the left engine after departing New York’s LaGuardia Airport, when a fan blade failed. The fan blade failure resulted in the loss of portions of the inlet and fan cowl. Fragments from the fan cowl struck the fuselage, a cabin window departed the airplane, and a rapid depressurization occurred. The flight crew conducted an emergency descent and diverted to Philadelphia International Airport. There were 144 passengers and five crewmembers aboard.  One passenger suffered fatal injuries and eight passengers suffered minor injuries. The airplane was substantially damaged.

WHO:  NTSB investigative staff and board members.

WHAT:  An open to the public board meeting.

WHERE:  NTSB Boardroom and Conference Center, 420 10th St., SW, Washington, DC.

WHEN:  Tuesday, Nov. 19, 2019, 9:30 a.m. (EST).




NTSB public events are also streamed via live webcast. Webcasts are archived for a period of 3 months from the date of the meeting. Webcast archives are generally available by the end of the event day for public meetings, and by the end of the next day for technical conferences.

If you wish to obtain a copy of an NTSB meeting, please contact the NTSB Records Management Division at (202) 314-6551,  or 800-877-6799. You may also request this information from the NTSB website,  or write to the following: National Transportation Safety Board, Records Management Division (CIO-40), 490 L'Enfant Plaza, SW, Washington, DC 20594.

Enter the YouTube ID of each video separated by a semi-colon (;). Example: "LV5_xj_yuhs; QgaTQ5-XfMM; VWW8DMpfI9U; BgAlQuqzl8o;"