Derailed hopper car.

​Figure. Derailed hopper car.​

Hardy Farms Employee Fatality

What Happened

​​This information is preliminary and subject to change.

​On October 7, 2026, about 8:35 a.m. local time, an employee of Hardy Farms was fatally injured while attempting to move a railcar at a facility in Durant, Oklahoma.[1]  The employee was part of a two-person crew assigned to move hopper car GABX 863029 using a front-end loader.[2] (See figure.) The crew consisted of a loader operator (operator) and a laborer. Weather conditions at the time of the accident were reported as sunny and clear, with a temperature of approximately 63°F and light winds.

​The crew was attempting to relocate a hopper car up a grade on an unloading track. The operator was using a front-end loader to reposition the railcar by pushing the loader bucket against the jack plate on the right side of the hopper car.[3] The laborer was on the left side of the hopper car, assigned to operate the hand brake under the direction of the operator. As the operator positioned the bucket against the jack plate to initiate a controlled move, the hopper car unexpectedly began to roll backward and down the grade of the track, toward a derail used to keep railcars from rolling onto the Union Pacific Railroad main track.[4] The operator boarded the side of the moving hopper car and attempted to apply the hand brake before it reached the derail. As the train drew closer to the derail, the operator shouted to the laborer to jump clear of the hopper car and proceeded to do so as well. As the hopper car struck the derail, it overturned, and rolled onto its side. The laborer attempted to jump clear but was fatally injured when the derailing hopper car struck him.

All aspects of this accident remain under investigation while the National Transportation Safety Board determines the probable cause and ways to prevent similar accidents.

Parties to the investigation include Occupational Safety and Health Administration and Hardy Farms.​


​​​​​
  1. ​Hardy Farms is an industry that sells cattle feed. The facility is served by Union Pacific Railroad from the Choctaw Subdivision near Milepost 640.8.
  2. A front-end loader is a heavy earthmoving machine with a large bucket attached to the front that is lifted, lowered, and tilted by hydraulic arms.
  3. ​​A jack plate is a reinforced steel plate welded to the underside of a railcar body (on both sides). A jack plate’s primary purpose is to provide a designated, safe, and stable surface to push against when the railcar needs to be lifted or repositioned.
  4. A derail is an appliance designed to derail rail equipment when traversed over. Derails are commonly used to prevent rail equipment from entering or exiting tracks to protect against unauthorized movement.

Video

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

​​​​​​ ​
​
​