Diagram of the accident scene.​

​​​Diagram of the accident scene.​

Norfolk Southern Railway Employee Injury

What Happened

​​​This information is preliminary and subject to change.

​​​​Updated 20​ August 2026

​On July 12, 2026, about 9:17 p.m. local time, a Norfolk Southern Railway conductor was seriously injured while performing switching operations on track 4 in Youngtown Yard in Louisville, Kentucky.[1] Before the accident, a switching crew consisting of an engineer and the conductor was building a train by coupling railcars.[2] The crew was in the process of coupling a group of eight railcars. This move caused six uncoupled railcars to free roll eastward, away from the conductor, and then come to a brief stop.[3] While these six uncoupled railcars were stopped, the conductor walked eastward and fouled the track between railcars 6 and 7.[4] At the time of the accident, the conductor was between the equipment when the six uncoupled railcars began to free roll westward, back toward the conductor, and then pinned him between railcars 6 and 7.[5]  After the accident, emergency medical services transported the injured conductor to the hospital. Visibility was clear at the time of the accident; the weather was 78°F with no precipitation.

​All aspects of the accident remain under investigation while the National Transportation Safety Board determines the probable cause with the intent to issue safety recommendations to prevent similar events.

Parties to the investigation include:

  • ​the Federal Railroad Administration;
  • Norfolk Southern Railway; 
  • the Brotherhood of Locomotive Engineers and Trainmen; and 
  • the International Association of Sheet Metal, Air, Rail and Transportation Workers.

[1] Switching operations involve moving railroad equipment from one track to another or to different positions on the same track. 
[2] (a) Crewmembers couple equipment by connecting one piece of equipment (such as a railcar) to another. (b) The train consisted of 36 railcars and a locomotive. 
[3] Railcar movements are described according to timetable direction, not geographic direction.
[4] A track is fouled when an individual or equipment is in the gauge of the track and hence can be struck by a moving train or on-track equipment. 
[5] At the time of the accident, railcars 7 through 36 were coupled to the train. Of the six railcars not coupled to the train, railcars 1 through 4 were coupled together, and railcars 5 and 6 were coupled together.

Video

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

​​​​​​ ​
​
​